Very Merry Berry Earrings - a Free project from The Twelve Days of Christmas Ebook Vol 4

Are you excited? It's December and that means my annual Twelve Days of Christmas Earrings ebook is now available.

Volume 4 has some stunning Christmas and holiday earring designs and clever ideas for using jewellery components in ways you've never thought of before.

Click here to see the spectacular holiday earring projects included. The ebook is downloadable (and printable!) right after purchase.

I'm sharing one of the projects right here to give you a taste of what you can expect from the ebook. These dangly Very Merry Berry earrings feature long chains of sparkly crystals to tickle your neck. With these earrings, you'll be set to sparkle your way through all those festive parties!

Here's what you'll need to make these sparkly Christmas earrings:

16 x 4mm Siam Swarovski bicone crystals
16 x 4mm Light Siam Swarovski bicone crystals
12 x 4mm Silver Night Swarovski bicone crystals
2 x 13x9mm Silver Plated Petal Bead Caps
28" silver small-beaded necklace chain
44 fine gauge silver head pins
2 silver eye pins
2 earring wires

Tools: Chain nose pliers, flat nose pliers, round nose pliers, flush cutters, ruler

Finished length: approximately 6.5cm (2.5")

Cut the chain into two equal halves and set one half aside, along with half of all the other materials for the second earring. Cut the other chain into nine pieces, varying in length from 2.5cm (1") up to 5cm (2").

String each of the bicones on a head pin. Turn a 90° angle on each one, trim the end to 8mm (5/16") and turn a simple loop.

On each length of chain, attach a bicone by opening the loop of the head pin and hooking it through the last link of the chain.

Open the loops of the remaining crystals and hook them around the chain above the beads of the chain. If you are using a plain chain in place of the beaded chain, hook the loops through links of the chain instead.

The chain length should now look something like this.

Repeat for all the lengths of chain, placing the crystals at varying lengths along the chains.

Slide the first link of each chain onto the shaft of the eye pin. Once all the chains are threaded, open the eye pin loop and slide the chain lengths around it. Close the loop.

Insert the eye pin through the bead cap.

Bend it a 90° angle.

Turn a simple loop and then hook it onto the earring wire.

Make a second earring to match with the remaining components.

Looking for more inspiration for Christmas earrings? Check out the ebook: Twelve Days of Christmas Earrings Volume 4.

Pin this Project!